TOP Stitch Needles 15X1ST - # 14 for Janome Brand 990514000A

JANOME sewing machine needles will fit all home sewing machines.

990514000A -> Top stitching function

Tips :

1. Use the needle for multi-directional quilting: the thread is guaranteed to glide effortlessly
   through the long needle eye.
2. The needle creates fewer skipped stitches.
3. Use the needle for sewing with two or thicker threads as well as for decorative and topstitching work.

Suitable fabrics : 

1. The Topstitch Needle can be used with a wide range of fabrics.
2. The long eye makes it particularly suited for patchwork/quilting and
   anywhere where thick threads are used.

Available needle sizes

         
          90/14 X 5 - TOP STITCHING
 

Special features

1. Particularly long needle eye: 2.0 mm in all needle sizes

Point shape

            Slightly rounded point.

Color marking

            Nah

About the description from JANOME original company : Check here to learn more !

What suitable sewing machines ?

You may ask us this question.

We won't say any suitable sewing machines, because these SEWING NEEDLES are UNIVERSAL for HOME or INDUSTRIAL.

but we will give u some comment : (all you can found via taiwansewing.com)

Beginner : SINGER sewing needles.  It is easy to get.

Advanced : JANOME / SCHMETZ.

Senior : PFAFF / VIKING.

How to change sewing needles :

1 - Before change needle, please switch the power of your sewing machines.

2 - Place a piece of cloth undermeath in case of needle dropping.

3 - Don't fix the needle too tightly to avoid deformation or astant.

4 - Mind your fingers during exchange as the needle tip is very sharp.

     (That's why this will make the blue / red / purple tip color for you)

5 - proper use will extend the life time.

This product RJ-ANT1 allows you to change the needle easily and also Needle Threader.

Please check the following description for RJ-ANT1 from taiwansewing.com

CHANGE A NEEDLE

Turn off the power switch.

Holding the grip (A),

insert the needle into the needle clamp and push it up as far as it will go.

Then tighten the needle clamp screw firmly while keeping the holder in place.

NEEDLE THREADING

1. Turn off the power switch.
2. Hold the grip (A) of threader with mark (B) up. Guide the thread, inserting it into the Y-groove (C) of the knob from right to left.
3. Place the V-groove (D) over the needle just above the needle eye.
4. Slide the threader down the needle while pushing it gently until the threader pin goes into the needle eye.
5. Push the grip (A).
6. Remove the threader from the needle slowly. Then pick up the loop with the hook (E) pulling the end of the thread out to the back.

We offer sealed card, double folding blister, regular card package.

1. Double Card & Double Blister ;

2. Sealed Card ;

(Please kindly contact us for more package details)

For series 1 package, we can offer 5 size to you. Check the following Size.

Type 1.  8cm X 8cm Double folding

Double folding Blister size : 8X7.5X2cm (lenght X width X height)

Capacity of product : 5X4X1cm (length X width X height)

Type 2.  7.5cm X 15.5cm Double folding

Double folding Blister size : 15.5X7.5X2cm (lenght X width X height)

Capacity of product : 5X4X1cm (length X width X height)

Type 3.  7.5cm X 15.5cm Double folding

Double folding Blister size : 15.5X7.5X3cm (lenght X width X height)

Capacity of product : 5X4X2cm (length X width X height)

Type 4.  7.5cm X 15.5cm Double folding

Double folding Blister size : 15.5X7.5X3.5cm (lenght X width X height)

Capacity of product : 7.5X5X3cm (length X width X height)

Type 5.  10.5cm X 18cm Double folding

Double folding Blister size : 18X10.5X4cm (lenght X width X height)

Capacity of product : 8X6.5X4cm (length X width X height

For sealed card package, we offer 1 type to you.

Series  9.5 X 9.5 cm sealed card package (1 sewing foot in)

Card size : 9.5 cm X 9.5 cm (length X width)

Sealed size : 3 X 3 X 1.5 cm (Length X Width X Height)

----------Others 3in, 5in, 15in, 10in belongs to OEM/ODM.