Denim Needles 15X 1DE #16 for Janome Brand 990416000A

JANOME sewing machine needles will fit all home sewing machines.

This Ball point needles 990416000A design for JANOME, but also fit all sewing machines you have.

After we testing, 990416000A for mostly DENIM fabric

How do I know what type of these needles, please check the following photo.

Tips :

1. The medium ball point displaces fabric threads :
   The needle penetrates into the spaces,
   which reduce the penetration force and helps to reduce needle breakage. 

Suitable fabrics : 

1. Strong and thick fabric.
2. Jeans
3. Twill
4. Canvas
5. Denim

Available needle sizes

          100/16 - Ball point 990416000A
 

Special features

1. Reinforced Blade.

Point shape

            Midium ball point

Color marking

            Nah

About the description from JANOME original company : Check here to learn more !

Ball point Needles -

These are relatively new needles in the JANOME range of needles. These are ''ball point'' needles so are especially good.

What suitable sewing machines ?

You may ask us this question.

We won't say any suitable sewing machines, because these SEWING NEEDLES are UNIVERSAL for HOME or INDUSTRIAL.

but we will give u some comment : (all you can found via taiwansewing.com)

Beginner : SINGER sewing needles.  It is easy to get.

Advanced : JANOME / SCHMETZ.

Senior : PFAFF / VIKING.

How to change sewing needles :

1 - Before change needle, please switch the power of your sewing machines.

2 - Place a piece of cloth undermeath in case of needle dropping.

3 - Don't fix the needle too tightly to avoid deformation or astant.

4 - Mind your fingers during exchange as the needle tip is very sharp.

     (That's why this will make the blue / red / purple tip color for you)

5 - proper use will extend the life time.

This product RJ-ANT1 allows you to change the needle easily and also Needle Threader.

Please check the following description for RJ-ANT1 from taiwansewing.com

CHANGE A NEEDLE

Turn off the power switch.

Holding the grip (A),

insert the needle into the needle clamp and push it up as far as it will go.

Then tighten the needle clamp screw firmly while keeping the holder in place.

NEEDLE THREADING

1. Turn off the power switch.
2. Hold the grip (A) of threader with mark (B) up. Guide the thread, inserting it into the Y-groove (C) of the knob from right to left.
3. Place the V-groove (D) over the needle just above the needle eye.
4. Slide the threader down the needle while pushing it gently until the threader pin goes into the needle eye.
5. Push the grip (A).
6. Remove the threader from the needle slowly. Then pick up the loop with the hook (E) pulling the end of the thread out to the back.

   We offer sealed card, double folding blister, regular card package.

   1. Double Card & Double Blister ;

   2. Sealed Card ;

   (Please kindly contact us for more package details)

   

   For series 1 package, we can offer 5 size to you. Check the following Size.

   

   Type 1.  8cm X 8cm Double folding

   Double folding Blister size : 8X7.5X2cm (lenght X width X height)

   Capacity of product : 5X4X1cm (length X width X height)

   

   Type 2.  7.5cm X 15.5cm Double folding

   Double folding Blister size : 15.5X7.5X2cm (lenght X width X height)

   Capacity of product : 5X4X1cm (length X width X height)

   

   Type 3.  7.5cm X 15.5cm Double folding

   Double folding Blister size : 15.5X7.5X3cm (lenght X width X height)

   Capacity of product : 5X4X2cm (length X width X height)

   

   Type 4.  7.5cm X 15.5cm Double folding

   Double folding Blister size : 15.5X7.5X3.5cm (lenght X width X height)

   Capacity of product : 7.5X5X3cm (length X width X height)

   

   Type 5.  10.5cm X 18cm Double folding

   Double folding Blister size : 18X10.5X4cm (lenght X width X height)

   Capacity of product : 8X6.5X4cm (length X width X height

   

   For sealed card package, we offer 1 type to you.

   

   Series  9.5 X 9.5 cm sealed card package (1 sewing foot in)

   Card size : 9.5 cm X 9.5 cm (length X width)

   Sealed size : 3 X 3 X 1.5 cm (Length X Width X Height)

   ----------Others 3in, 5in, 15in, 10in belongs to OEM/ODM.