2020 Add fitting sewing machines : SINGER IDT sewing machine
Fit SINGER IDT sewing machine model : C240 and future new series. (2020 -
820474096 family sewing machines : TYPE C D E F G J K (Cat.)
Before fitting sewing machines, please check the following classification :
(PFAFF sewing feet belongs to TAIWAN UNIQUE choosen)
By finding the code letter that represents your machine from the list below,
You'll be able to tell which accessories through-out the catalogue are available for your machine.
If you have any questions, Please check the PFAFF offical website : PFAFF SEWING COMPANY
Which presser foot fits your sewing machine? Just check the following.
Invisible zippers are the least noticeable of all zippers. As the name
implies, the zipper is hidden in a seam, becoming virtually invisible.
This makes it a popular choice for elegant clothing sewn with expensive
materials, like evening wear. But it‘s equally appropriate for skirts,
blouses and other everyday clothing items. Invisible zippers (also called
concealed zippers) are easily sewn with the PFAFF® Invisible Zipper
Foot!
1. Use the marking pen to mark the length of the zipper on the right side of the fabric, on both
sides of the opening. The zipper should be at least 2 cm to 3 cm (3/4 to 1 1/4 inch)
longer than the opening.
2. Attach the special Invisible Zipper Foot and select a straight stitch, center needle position
and stitch length to 2.5 to 3.0 mm.
3. Open the zipper and flatten the coil slightly with your thumb, so that the seam line between
the tape and the coil becomes visible. Never iron the zipper.
4. Place the right half of the zipper onto the right side of the opening, with right sides of the
zipper and fabric together. The coil should lie directly on the seam line, starting about 1.5
to 2 cm (5/8 to 3/4 inch) below the upper edge of the fabric. Pin in place,
if desired. Make sure that the bottom end of the zipper extends 2 cm to 3 cm (3/4 to
1 1/4 inch) beyond the bottom end of the opening. (ill. A)
5. Carefully press the teeth slightly to the right and lower the zipper foot, so that the
coil lies in the groove to the right of the needle.
6. Starting at the top, sew the zipper in place, stopping at the previously marked end of the
opening. Tie-off the end of the seam. Close the zipper. (ill. B,C)
7. Place the second zipper tape on the left side of the opening, on the right side of the fabric.
Make sure that both coils are level.
8. Pin the zipper in place. Open the zipper.
9. Carefully press the teeth slightly to the left and lower the Zipper Foot, so that the coil lies in
the groove to the left of the needle.
10. Starting at the top, sew the zipper in place, stopping at the previously marked end of the
opening. Tie-off the end of the seam. Close the zipper.
11. Finally, sew the seam below the zipper, starting at the bottom and working up. Attach the
standard Zipper Foot so that the presser foot clamp and the foot are to the right of center.
Move the needle to the right. (ill. D)
12. Pull the loose bottom end of the zipper toward the seam allowances and stitch as close as
possible up to the last stitches of the zipper seams.
13. Press the seam open.
TIP: If the zipper is too long, sew over the end of the coil with a straight stitch or a closely
spaced zigzag stitch, approx. 2 cm (3/4 inch) below the bottom end of the opening. Cut
off the excess zipper and finish the raw edge with a small piece of fabric. Source from PFAFF.com
Machines with 5 mm and 6 mm stitch width, without IDT™ system
varimatic™ 6087, 6086, 6085 (6 mm)
*hobby™ 309, 307, 303, 301 (5,5 mm)
These sewing machines have a presser foot holder of 6 mm. Because newer
presser feet are produced to fit 8 mm holders, there may be a small gap between
the holder and the presser foot attachment. You will need to change the 8 mm
presser foot holder when using the newer presser feet.
Machines with 5,5 mm stitch width, without IDT™ system
hobby™ 1042, 1040, 1032, 1030, 1022, 1020, 1016
Machines with 5,5 mm stitch width, without IDT™ system
expression™ 2014
tiptronic™ 6112, 6110, 2020, 2010
select™ 2.2, 2.0, 1528, 1526, 1520
hobby™ 4260, 4250, 4240
Machines with 5,5 mm and 6 mm stitch width, and IDT™ system
select™ 4.2, 4.0, 3.2, 3.0,
select™ 1548, 1546, 1540, 1538, 1536, 1530 (5,5 mm)
tiptronic™ 6270, 6250, 6232, 6230,
tiptronic™ 6152, 6150, 6122, 6120 (5,5/6 mm)
stretch & jeans™ 6091 (6 mm)
freestyle™ 1527, 1522
Machines with 6 mm stitch width, and IDT™ system
creative™ 2124
quilt expression™ 2046, 2044, 2042
expression™ 2036, 2034, 2028, 2026, 2024
classicstyle™ 2029, 2027, 2025, 2023
tiptronic™ 2040, 2030, 2020, 2010
Machines with 9 mm stitch width, without IDT™ system
creative™ 7560
Machines with 9 mm stitch width, and IDT™ system
creative™ 2170 , 2144, 2140, 2134
creative™ 7570, 7562, 7550, 7530
performance™ 2058, 2056, 2054
quilt expression™ 2048
expression™ 2038
Machines with 5,5 mm stitch width, without IDT™ system
hobby™ 1142, 1132, 1122
Machines with 9 mm stitch width, and IDT™ system
creative sensation™ pro
creative sensation™
creative vision™
creative performance™
creative™ 4.5, 4.0, 3.0, 2.0
performance™ 5.0
quilt expression™ 4.2, 4.0
expression™ 3.5, 3.2, 3.0, 2.0
expression™ 150
Machines with 7 mm stitch width, and IDT™ system
creative™ 1.5
quilt ambition™ 2.0
ambition™ 1.5
ambition™ 1.0
ambition essential™
passport™ 2.0
Machines with 6 mm stitch width
SMARTER BY PFAFF™ 260c,160s,140s
------------- Or, you can contact us for more detail.
We offer sealed card, double folding blister, regular card package.
1. Double Card & Double Blister ;
2. Sealed Card ;
(Please kindly contact us for more package details)
For series 1 package, we can offer 5 size to you. Check the following Size.
Type 1. 8cm X 8cm Double folding
Double folding Blister size : 8X7.5X2cm (lenght X width X height)
Capacity of product : 5X4X1cm (length X width X height)
Type 2. 7.5cm X 15.5cm Double folding
Double folding Blister size : 15.5X7.5X2cm (lenght X width X height)
Capacity of product : 5X4X1cm (length X width X height)
Type 3. 7.5cm X 15.5cm Double folding
Double folding Blister size : 15.5X7.5X3cm (lenght X width X height)
Capacity of product : 5X4X2cm (length X width X height)
Type 4. 7.5cm X 15.5cm Double folding
Double folding Blister size : 15.5X7.5X3.5cm (lenght X width X height)
Capacity of product : 7.5X5X3cm (length X width X height)
Type 5. 10.5cm X 18cm Double folding
Double folding Blister size : 18X10.5X4cm (lenght X width X height)
Capacity of product : 8X6.5X4cm (length X width X height
For sealed card package, we offer 1 type to you.
Series 9.5 X 9.5 cm sealed card package (1 sewing foot in)
Card size : 9.5 cm X 9.5 cm (length X width)
Sealed size : 3 X 3 X 1.5 cm (Length X Width X Height)
----------Others 3in, 5in, 15in, 10in belongs to OEM/ODM.
This foot can be also used on the ''regular low shank'' sewing machines.
Step 1. Change 9869488600 to replace the original shank adapter.
Step 2. Use the screw from RENJYI - RJ-SC02 to against the bar.
Step 3. try it on and use it.
This set calls : 9869488600 + RJ-SC02
Order PT. number : RJ-SC02-PF
