SEW-ON BUTTON FOOT

2020 Add fitting sewing machines : SINGER IDT sewing machine

Fit SINGER IDT sewing machine model : C240 and future new series. (2020 -

820473096 family sewing machines : TYPE B C D E F G J K

Before fitting sewing machines, please check the following classification :

(PFAFF sewing feet belongs to TAIWAN UNIQUE choosen)

By finding the code letter that represents your machine from the list below,

You'll be able to tell which accessories through-out the catalogue are available for your machine.

If you have any questions, Please check the PFAFF offical website : PFAFF SEWING COMPANY

Which presser foot fits your sewing machine? Just check the following.

Sewing on buttons can be a tedious job – but not when you use the
Sew-on Button Foot! Use it to easily sew 2- or 4-hole buttons of various
sizes in place. Just set the stitch width to match the spacing between
the holes and your machine does all the work. By including a shaft,
you can even sew on buttons with a thread shank, see illustration.

1. Mark on the fabric where you want the
button to be placed.
2. Snap on the Sew-on Button Foot.
3. Lower feed dogs.
4. Insert the button between the black metal
piece and the presser foot. Make sure
that two holes are positioned in the cutout
of the presser foot.
5. Place the fabric under the presser foot.
Select button sew-on stitch or zigzag
stitch. Lower feed dogs.

6. Select width to match buttonholes.
Manually turn the hand wheel to make
sure that the needle enters the left hole.
7. Start to sew. The machine will
automatically tie off your button if using
button sew-on stitch. If using zigzag, sew
across button five times.

If you want your button to have a shank, push the plastic piece on the presser foot towards you,
placing it between the two holes of the button. When you have finished sewing your button, pull
the plastic piece back, remove your button from the presser foot and cut off the threads. Wrap
the seam with sewing thread and make a knot.  source : PFAFF.com

Machines with 5 mm and 6 mm stitch width, without IDT™ system
varimatic™ 6087, 6086, 6085 (6 mm)
*hobby™ 309, 307, 303, 301 (5,5 mm)
These sewing machines have a presser foot holder of 6 mm. Because newer
presser feet are produced to fit 8 mm holders, there may be a small gap between
the holder and the presser foot attachment. You will need to change the 8 mm
presser foot holder when using the newer presser feet.

Machines with 5,5 mm stitch width, without IDT™ system
hobby™ 1042, 1040, 1032, 1030, 1022, 1020, 1016

Machines with 5,5 mm stitch width, without IDT™ system
expression™ 2014
tiptronic™ 6112, 6110, 2020, 2010
select™ 2.2, 2.0, 1528, 1526, 1520
hobby™ 4260, 4250, 4240

Machines with 5,5 mm and 6 mm stitch width, and IDT™ system
select™ 4.2, 4.0, 3.2, 3.0,
select™ 1548, 1546, 1540, 1538, 1536, 1530 (5,5 mm)
tiptronic™ 6270, 6250, 6232, 6230,
tiptronic™ 6152, 6150, 6122, 6120 (5,5/6 mm)
stretch & jeans™ 6091 (6 mm)
freestyle™ 1527, 1522

Machines with 6 mm stitch width, and IDT™ system
creative™ 2124
quilt expression™ 2046, 2044, 2042
expression™ 2036, 2034, 2028, 2026, 2024
classicstyle™ 2029, 2027, 2025, 2023
tiptronic™ 2040, 2030, 2020, 2010

Machines with 9 mm stitch width, without IDT™ system
creative™ 7560

Machines with 9 mm stitch width, and IDT™ system
creative™ 2170 , 2144, 2140, 2134
creative™ 7570, 7562, 7550, 7530
performance™ 2058, 2056, 2054
quilt expression™ 2048
expression™ 2038

Machines with 5,5 mm stitch width, without IDT™ system
hobby™ 1142, 1132, 1122

Machines with 9 mm stitch width, and IDT™ system
creative sensation™ pro
creative sensation™
creative vision™
creative performance™
creative™ 4.5, 4.0, 3.0, 2.0
performance™ 5.0
quilt expression™ 4.2, 4.0
expression™ 3.5, 3.2, 3.0, 2.0
expression™ 150

Machines with 7 mm stitch width, and IDT™ system
creative™ 1.5
quilt ambition™ 2.0
ambition™ 1.5
ambition™ 1.0
ambition essential™
passport™ 2.0
Machines with 6 mm stitch width
SMARTER BY PFAFF™ 260c,160s,140s

------------- Or, you can contact us for more detail.

We offer sealed card, double folding blister, regular card package.

1. Double Card & Double Blister ;

2. Sealed Card ;

(Please kindly contact us for more package details)

For series 1 package, we can offer 5 size to you. Check the following Size.

Type 1.  8cm X 8cm Double folding

Double folding Blister size : 8X7.5X2cm (lenght X width X height)

Capacity of product : 5X4X1cm (length X width X height)

Type 2.  7.5cm X 15.5cm Double folding

Double folding Blister size : 15.5X7.5X2cm (lenght X width X height)

Capacity of product : 5X4X1cm (length X width X height)

Type 3.  7.5cm X 15.5cm Double folding

Double folding Blister size : 15.5X7.5X3cm (lenght X width X height)

Capacity of product : 5X4X2cm (length X width X height)

Type 4.  7.5cm X 15.5cm Double folding

Double folding Blister size : 15.5X7.5X3.5cm (lenght X width X height)

Capacity of product : 7.5X5X3cm (length X width X height)

Type 5.  10.5cm X 18cm Double folding

Double folding Blister size : 18X10.5X4cm (lenght X width X height)

Capacity of product : 8X6.5X4cm (length X width X height

For sealed card package, we offer 1 type to you.

Series  9.5 X 9.5 cm sealed card package (1 sewing foot in)

Card size : 9.5 cm X 9.5 cm (length X width)

Sealed size : 3 X 3 X 1.5 cm (Length X Width X Height)

----------Others 3in, 5in, 15in, 10in belongs to OEM/ODM.

This foot can be also used on the ''regular low shank'' sewing machines.

Step 1. Change 9869488600 to replace the original shank adapter.

Step 2. Use the screw from RENJYI - RJ-SC02 to against the bar.

Step 3. try it on and use it.

This set calls : 9869488600 + RJ-SC02

Order PT. number : RJ-SC02-PF